MX SERIES CAM CLUTCHES

Products > Cam clutch > MX SERIES CAM CLUTCHES

MX SERIES CAM CLUTCHES

1. Inner ring 2. Outer ring 3. Cam 4. Inner ring 5. Bearing 6. Collar 7. Oil seal

Other introductions:

Size and performance

		Maximum division speed	Stock Bore Size		A	B(h7)	C
Model	Torque Capacity	Max.lndexing	Dia	Keyway	A	B(h7)	C
	N.m	cys/min	H7
MX22	78.4	1200	22	6x2.8	80	95	77
MX35	235	1200	35	10x3.8	90	125	87
MX50	441	1200	50	14x3.8	100	155	97
MX70	784	1200	70	20x4.9	127	200	124

Model	D	E	F	S	H-M cavity	Lubrication Size x Pitch	Oil(cc)	Weight(kg)

Mx22	80	12	35	16	4xM8xP1.25	M6xP1.0	80	3.3
MX35	110	12	50	16	4xM8xP1.25	M6xP1.25	110	6.4
MX50	140	14	70	16	6xM8xP1.25	M8xP1.25	190	10.6
MX70	180	15	100	20	6xM10xP1.5	M8xP1.25	340	21.3

Installation and use

During installation, press the clutch into the holes of the pulley, gear, or lever arm, and tighten the bolt (high tensile strength) into the tooth hole on the clutch end face. As shown in the figure.

The MX series cam clutch is a press fit and used for indexing purposes, but the interference fit during press fit should not exceed 0.025mm.

Adjust one side of the key to fit tightly with the keyway, but there should be a certain gap between the top of the key and the keyway.

When installing the clutch onto the shaft, please apply pressure to the inner ring end face of the clutch, and do not apply pressure to the outer ring.

Choose the appropriate clutch to achieve precise indexing performance. Braking devices and anti reverse devices also require precise performance.

Previous： MG SERIES CAM CLUTCHES

Next： MA SERIES CAM CLUTCHES